Wade 0.3.0 — M5Stack CoreS3 Lite

Download espflash 4.6.0 for your computer and put it on PATH:
https://github.com/esp-rs/espflash/releases/tag/v4.6.0
Use a USB data cable and close any serial monitor first.
Add --port YOUR_PORT to the espflash command if several devices are connected.

FIRST INSTALL / RESET (replaces firmware and discards saved settings):
  espflash erase-flash --chip esp32s3
  espflash write-bin --chip esp32s3 0x0 install.bin

UPDATE EXISTING WADE (keeps settings with the compatible partition layout):
  espflash write-bin --chip esp32s3 0x10000 app.bin

Do not erase flash or use install.bin when preserving settings.
Check release notes before downgrading: older firmware may not read newer settings.
Browser update: use update.json and leave Erase device unchecked.
Recovery and supported hardware: https://github.com/clarkedb/wade/blob/main/docs/releases.md
